New User? Sign In and help us improve your support experience.

Registered users - sign in

Email Address :

Example: your_address


Please log in with your PeoplePC email address and password.

This helps us provide the best information possible,
and you won’t have to login on your next visit.

Email Address :

Example: your_address


Thank You. You have successfully logged in.

Sorry, there is a problem with this account, One moment while we direct you to a Live Agent.

silhouettes EarthLink Logo
Search Knowledgecenter
Save to Favorites | Print Page | Save as PDF

Innoband 8012-G1 Modem Firmware
Innoband 8012G1 Modem Firmware
  • Article ID: 35629
  • Last modified date: November 5, 2009 10:11
  • DSL Operating System(s):
  • DSL Hardware: Innoband 8012-G1 modem

Innoband Firmware
This easy to use software upgrades the firmware on your Innoband 8012-G1 modem.

Size: 1.4MB

System Requirements:
  • A PC running Microsoft Windows.
  • An Innoband 8012-G1 modem.
    (On the bottom of the modem you will find a sticker showing model number 8012-G1)

For Instructions on setting up PPOE mode, please refer to the following Knowledge Base article: Innoband (Broadxent) BritePort 8012-G1 Modem - Setting Up the Modem for PPPoE


Innoband 8012-G1 modem firmware

Click the Download button above to download the firmware upgrade program and save it to your Windows Desktop.


Disconnect all wireless routers or other network equipment from your computer.


Connect your PC directly to your Innoband modem.


Turn the modem's power on.


Next to the power cable connection on the back of the modem is a RESET hole. Insert a pin or straightened paperclip hole and hold the button inside down until the lights on the front of the modem flash, then turn off. This will take about 10 seconds.


Double-click the file you just downloaded (8012G1_UpdateFw_3. to begin upgrading the firmware on your modem. From this point on, DO NOT turn off your computer or modem until the upgrade has completed.


A WinZip self-extraction window will open. Click OK.


Click Unzip on the next window, which asks you to select a destination folder. The program will run automatically, so you don't need to select a folder to save it to.


The WinZip success window will appear. Click OK


The firmware upgrade program will run automatically, and you'll see the Update Firmware window. Click Update


The firmware upgrade will begin and you'll see the following message:


When the upgrade has finished, you'll see the following window:


Your firmware has now been upgraded. To exit the window above, click OK

Was this article helpful to you?
Your rating
If any information was unclear, or the information you were seeking was not provided, please let us know! Your feedback will help us improve this service.
NOTE: This form is for feedback only to help us improve our support site. Changes, additions or the cancellation of products cannot be processed via the feedback form. Comments entered here will NOT receive a personal email response. If you have a technical or account issue that needs immediate attention, please
Bottom Container