Summary
Innoband (Broadxent) BritePort DSL Bridge 8012-G1 uses the most advanced “splitterless” Asymmetric DSL(ADSL) technology. This article provides a hardware overview for the Innoband (Broadxent) BritePort 8012-G1 Modem.
| Innoband (Broadxent) BritePort 8012-G1 Modem Details |
- One RJ-11 DSL port, one 10/100m RJ-45 LAN port , One RJ-11 Phone port
- Default LAN IP address / subnet: 192.168.1.1 / 255.255.255.0
- Default DHCP IP Pool Starting Address: 192.168.1.10
- External Reset button
| Innoband (Broadxent) BritePort 8012-G1 |
Front::
Back:
| Innoband BritePort 8012-G1 Light Status |
|
LED |
Description |
| POWER | ON when BritePort 8012-G1 is connected to a power source. |
| DSL | Flashes for a few seconds and stays ON when a DSL connection is established. If it remains blinking, it is unable to detect DSL service. |
| LAN | ON when an Ethernet connection is detected. Blinks when data transfers. Off if unable to detect PC or Router. |
| INTERNET | ON when PPPoE connection is established. OFF when Bridged or reset. |
Was this article helpful to you?
